#tyndur · 2010-02-23

55 Nachrichten · Seite 1 von 1 · Original-CSV herunterladen

  1. pcmattmanHello kwolf
  2. kwolfHi pcmattman
  3. pcmattmanHow're you?
  4. kwolfCan't complain. How about you?
  5. pcmattmanGetting busier again. Lately been less busy and had more time to write code, not so much now.
  6. pcmattmanAt least Pedigree is pretty much up-to-date with respect to CDI
  7. kwolfWe can change that ;-)
  8. pcmattman:(
  9. kwolfThough recently I haven't had that much time for it either
  10. kwolfThe next step on my side is changing send_packet etc. to use cdi_mem_area. Should mainly affect the drivers, callers should be easy to adjust
  11. pcmattmanWell, it seems like the cdi/mem changes have worked so far
  12. kwolfThey aren't doing anything interesting yet. ;-)
  13. pcmattmanThe rtl8139 driver works perfectly on Pedigree
  14. pcmattmanYes, once cdi_mem_require_flags starts getting used, there'll be some problems
  15. kwolfFun starts when drivers start using scatter/gather
  16. pcmattmanSame for cdi_mem_copy
  17. pcmattmanOh, right
  18. pcmattmanScatter/gather is something I'll implement when I need to :)
  19. kwolfYou'll never need to
  20. pcmattmanI know exactly how to implement it, it's just extra effort that isn't being used right now
  21. pcmattmanThat is, extra code that isn't used by any driver
  22. kwolfSomeone must be the first one
  23. pcmattmanThe e1000 could easily be implemented as a livescribe driver
  24. kwolfImplementing it in drivers when no OS is capable of using it is just as bad ;-)
  25. pcmattmanUhh, not livescribe
  26. pcmattmanAs a driver which uses scatter/gather
  27. kwolfYes, I think so
  28. pcmattmanSorry, just got an email about those livescribe pens from a colleague :)
  29. pcmattmanBut yes, the TX/RX descriptors are a perfect place to use cdi/mem's scatter/gather feature
  30. pcmattmanWho wants to edit the driver though? ;)
  31. kwolfFreakyPenguin! ;-)
  32. kwolfHe has one in real hardware, at least
  33. pcmattmanI technically have hundreds in real hardware... at work ;)
  34. kwolfThen make use of it ;-)
  35. pcmattmanI want to, one day
  36. kwolfHundreds of exactly the same model, or different revisions and such?
  37. pcmattmanHmm
  38. pcmattmanMostly the same model
  39. pcmattmanI also know there's a couple of RTL8139 NICs that are going to be written off (ie, "binned") soon
  40. kwolfSo you can take them home? ;-)
  41. pcmattmanI'll snap those up and browse the internet on a real computer for the first time in Pedigree
  42. pcmattmanYeah, same goes for the 10/100 switches that are probably going to get binned
  43. pcmattmanI don't need gigabit for a mini testing network for Pedigree
  44. pcmattmanI just need infrastructure
  45. kwolfHeh, I have a tyndur computer which I already have used for a short IRC/lynx session when I didn't want to wait for the Linux boot ;-)
  46. pcmattmanOne day I'd like to have 3 or 4 computers all hooked into a switch, all running Pedigree
  47. pcmattmanMaybe once I get some nice routing support into Pedigree I can even use a Pedigree box as a router between my testing network and my home network
  48. kwolfWell, considering tyndur's current tcpip module... No, I wouldn't want to do that ;-)
  49. kwolfBut being able to use IRC and browsing the web in your own OS is nice
  50. pcmattmanI have a lot of work to do before Pedigree can route packets properly
  51. pcmattmanBut it'd play nice on a local network
  52. pcmattmanHmm, I just accidentally implemented reboot(2)
  53. kwolfAccidentally with the right magic number? ;-)
  54. eddybmoin :)
  55. XanClicmoin, eddyb