#tyndur · 2010-06-02

28 Nachrichten · Seite 1 von 1 · Original-CSV herunterladen

  1. eddybXanClic: hi :D
  2. XanClicmoin
  3. eddybgot some updated
  4. eddyb*updates
  5. eddybmanaged to run pedigree on realhw
  6. eddybnow
  7. eddybthis is funny
  8. eddybI get Stall+CRC/Timeout for all packets I send
  9. eddybfirst
  10. eddybwhy would it stall for a setup?
  11. XanClicSeems like the standard procedure when trying it on real hardware for the first time
  12. eddybheh
  13. eddybAFAIR, specs say that stall for SETUP is kind of impossible
  14. XanClicRemember the timeout
  15. eddybright
  16. XanClicMaybe it's not stall but timeout
  17. eddybtimeout (99%)= address wrong
  18. eddybno facepalm yet
  19. eddybbut I may have been wrong when (re)coding the reset procedure
  20. XanClicMaybe your reset is wrong
  21. XanClicYep
  22. eddybso
  23. eddybI set the reset bit
  24. eddybwait 50ms
  25. XanClicWell, you can never trust real hardware
  26. eddybthen unset it while setting the third bit
  27. eddybwhich is the enable bit
  28. eddybunless there's something obvious, this will take a while to debug