[cdi-devel] [PATCH v2 6/9] cdi/usb: Add headers
Max Reitz ·
+ Add headers to be used by USB host controller drivers, the USB bus driver, and USB device drivers. These headers are still lacking functions for periodic transactions (interrupt/isochronous), hotplugging, suspend/resume, etc. pp.. Signed-off-by: Max Reitz <max at tyndur.org> --- include/cdi/usb-structures.h | 118 +++++++++++++++++++++++ include/cdi/usb.h | 217 +++++++++++++++++++++++++++++++++++++++++++ include/cdi/usb_hcd.h | 159 +++++++++++++++++++++++++++++++ 3 files changed, 494 insertions(+) create mode 100644 include/cdi/usb-structures.h create mode 100644 include/cdi/usb.h create mode 100644 include/cdi/usb_hcd.h diff --git a/include/cdi/usb-structures.h b/include/cdi/usb-structures.h new file mode 100644 index 0000000..70a74ce --- /dev/null +++ b/include/cdi/usb-structures.h @@ -0,0 +1,118 @@ +/* + * Copyright (c) 2015 Max Reitz + * + * This program is free software. It comes without any warranty, to + * the extent permitted by applicable law. You can redistribute it + * and/or modify it under the terms of the Do What The Fuck You Want + * To Public License, Version 2, as published by Sam Hocevar. See + * http://sam.zoy.org/projects/COPYING.WTFPL for more details. + */ + +/** + * This file contains some standard USB structures such as descriptors. + */ + +#ifndef _CDI_USB_STRUCTURES_H_ +#define _CDI_USB_STRUCTURES_H_ + +#include <stdint.h> + + +struct cdi_usb_device_descriptor { + uint8_t b_length; + uint8_t b_descriptor_type; + uint16_t bcd_usb; + uint8_t b_device_class; + uint8_t b_device_sub_class; + uint8_t b_device_protocol; + uint8_t b_max_packet_size_0; + uint16_t id_vendor; + uint16_t id_product; + uint16_t bcd_device; + uint8_t i_manufacturer; + uint8_t i_product; + uint8_t i_serial_number; + uint8_t b_num_configurations; +} __attribute__((packed)); + +struct cdi_usb_configuration_descriptor { + uint8_t b_length; + uint8_t b_descriptor_type; + uint16_t w_total_length; + uint8_t b_num_interfaces; + uint8_t b_configuration_value; + uint8_t i_configuration; + uint8_t bm_attributes; + uint8_t b_max_power; +} __attribute__((packed)); + +struct cdi_usb_string_descriptor { + uint8_t b_length; + uint8_t b_descriptor_type; + uint16_t b_string[127]; +} __attribute__((packed)); + +struct cdi_usb_interface_descriptor { + uint8_t b_length; + uint8_t b_descriptor_type; + uint8_t b_interface_number; + uint8_t b_alternate_setting; + uint8_t b_num_endpoints; + uint8_t b_interface_class; + uint8_t b_interface_sub_class; + uint8_t b_interface_protocol; + uint8_t i_interface; +} __attribute__((packed)); + +struct cdi_usb_endpoint_descriptor { + uint8_t b_length; + uint8_t b_descriptor_type; + uint8_t b_endpoint_address; + uint8_t bm_attributes; + uint16_t w_max_packet_size; + uint8_t b_interval; +} __attribute__((packed)); + +struct cdi_usb_setup_packet { + uint8_t bm_request_type; + uint8_t b_request; + uint16_t w_value; + uint16_t w_index; + uint16_t w_length; +} __attribute__((packed)); + + +/// Control request numbers +enum { + CDI_USB_CREQ_GET_STATUS = 0, + CDI_USB_CREQ_CLEAR_FEATURE = 1, + CDI_USB_CREQ_SET_FEATURE = 3, + CDI_USB_CREQ_SET_ADDRESS = 5, + CDI_USB_CREQ_GET_DESCRIPTOR = 6, + CDI_USB_CREQ_SET_DESCRIPTOR = 7, + CDI_USB_CREQ_GET_CONFIGURATION = 8, + CDI_USB_CREQ_SET_CONFIGURATION = 9, + CDI_USB_CREQ_GET_INTERFACE = 10, + CDI_USB_CREQ_SET_INTERFACE = 11, + CDI_USB_CREQ_SYNCH_FRAME = 12, +}; + +/// Descriptor IDs +enum { + CDI_USB_DESC_DEVICE = 1, + CDI_USB_DESC_CONFIGURATION = 2, + CDI_USB_DESC_STRING = 3, + CDI_USB_DESC_INTERFACE = 4, + CDI_USB_DESC_ENDPOINT = 5, +}; + +/// Values constituting cdi_usb_setup_packet.bm_request_type +#define CDI_USB_CREQ_DEVICE 0 +#define CDI_USB_CREQ_INTERFACE 1 +#define CDI_USB_CREQ_ENDPOINT 2 +#define CDI_USB_CREQ_OTHER 3 +#define CDI_USB_CREQ_CLASS (1 << 5) +#define CDI_USB_CREQ_OUT (0 << 7) +#define CDI_USB_CREQ_IN (1 << 7) + +#endif diff --git a/include/cdi/usb.h b/include/cdi/usb.h new file mode 100644 index 0000000..111e723 --- /dev/null +++ b/include/cdi/usb.h @@ -0,0 +1,217 @@ +/* + * Copyright (c) 2015 Max Reitz + * + * This program is free software. It comes without any warranty, to + * the extent permitted by applicable law. You can redistribute it + * and/or modify it under the terms of the Do What The Fuck You Want + * To Public License, Version 2, as published by Sam Hocevar. See + * http://sam.zoy.org/projects/COPYING.WTFPL for more details. + */ + +#ifndef _CDI_USB_H_ +#define _CDI_USB_H_ + +#include <stdint.h> + +#include <cdi.h> +#include <cdi/usb-structures.h> + + +struct cdi_usb_hc; + +typedef enum { + CDI_USB_CONTROL, + CDI_USB_BULK, + CDI_USB_INTERRUPT, + CDI_USB_ISOCHRONOUS, +} cdi_usb_endpoint_type_t; + +typedef enum { + CDI_USB_LOW_SPEED, + CDI_USB_FULL_SPEED, + CDI_USB_HIGH_SPEED, + CDI_USB_SUPERSPEED, +} cdi_usb_speed_t; + +typedef enum { + CDI_USB_OK = 0, + + CDI_USB_DRIVER_ERROR, + CDI_USB_TIMEOUT, + CDI_USB_BABBLE, + CDI_USB_STALL, + CDI_USB_HC_ERROR, + CDI_USB_BAD_RESPONSE, +} cdi_usb_transmission_result_t; + +/* Bitmask of CDI_USB_PORT_* and CDI_USB_*_SPEED values */ +typedef uint32_t cdi_usb_port_status_t; + +#define CDI_USB_PORT_SPEED_MASK (0x7) +#define CDI_USB_PORT_CONNECTED (1 << 3) + +struct cdi_usb_hub; + +/** + * Describes a hub driver. This is not a CDI driver in the common sense. When + * used for a root hub, it is part of the host controller driver; when used for + * a device hub, it is only used internally by the USB driver. + */ +struct cdi_usb_hub_driver { + /** + * Makes a port unreachable by traffic which reaches the hub. @index is a + * 0-based index. + */ + void (*port_disable)(struct cdi_usb_hub* hub, int index); + + /** + * Makes a port reachable by traffic which reaches the hub and drives the + * reset signal for at least 50 ms on the port. @index is a 0-based index. + */ + void (*port_reset_enable)(struct cdi_usb_hub* hub, int index); + + /** + * Retrieves information about the given port. This should only be called + * after the port has been reset using port_reset_enable(). @index is a + * 0-based index. + */ + cdi_usb_port_status_t (*port_status)(struct cdi_usb_hub* hub, int index); +}; + +/** + * Describes a USB hub. This is not a CDI device in the common sense. When used + * for a root hub, it is part of the host controller object; when used for a + * device hub, it is only used internally by the USB driver. + * + * For this reason, there is no struct cdi_usb_hub_driver object reachable from + * this object. If it is a root hub, the hub driver will be part of the host + * controller driver. Otherwise (if it is a device hub), the hub driver will be + * internal to the USB driver. + */ +struct cdi_usb_hub { + /** + * Number of ports provided by this hub. + */ + int ports; +}; + +/** + * Describes a USB device as given to cdi_provide_device() and the init_device() + * function provided by USB device drivers. + */ +struct cdi_usb_device { + struct cdi_bus_data bus_data; + + /** + * Various information which can be used for identifying a USB device. + */ + uint16_t vendor_id, product_id; + uint8_t class_id, subclass_id, protocol_id; + + /** + * If negative, this logical device is defined on the USB device level; + * otherwise, this is the index of the interface which this logical device + * represents. + */ + int interface; + + /** + * Number of endpoints available for this device; this does include the + * default pipe (endpoint 0) which can be used both on the physical device + * level and from any interface. + */ + int endpoint_count; +}; + +/** + * Describes the USB bus driver. + */ +struct cdi_usb_driver { + struct cdi_driver drv; + + /** + * Returns the endpoint descriptor for endpoint @ep (0 up until + * dev->endpoint_count - 1) of device @dev in @desc. + */ + void (*get_endpoint_descriptor)(struct cdi_usb_device* dev, int ep, + struct cdi_usb_endpoint_descriptor* desc); + + /** + * Executes a control transfer to endpoint @ep (0 up until + * dev->endpoint_count - 1) of device @dev, using @setup for the setup stage + * and @data for the data stage. The length and direction of transfer is + * deduced from @setup. + */ + cdi_usb_transmission_result_t + (*control_transfer)(struct cdi_usb_device* dev, int ep, + const struct cdi_usb_setup_packet* setup, + void* data); + + /** + * Executes a bulk transfer to endpoint @ep (0 up until + * dev->endpoint_count - 1) of device @dev, transferring @size bytes from/to + * @data. The direction of transfer is deduced from the endpoint given. + */ + cdi_usb_transmission_result_t (*bulk_transfer)(struct cdi_usb_device* dev, + int ep, void* data, + size_t size); +}; + +/** + * Describes patterns for USB devices a device driver can use to specify which + * devices it can handle. + */ +struct cdi_usb_bus_device_pattern { + struct cdi_bus_device_pattern pattern; + + /** + * Any field may be negative to signify "don't care". + */ + int vendor_id, product_id; + int class_id, subclass_id, protocol_id; +}; + + +/** + * This function is provided by the reference USB bus driver, it must only be + * called by the CDI library. + * + * It is called once a host controller driver provides a host controller device + * (returned by its init_device() function) which is passed to this function. + */ +void cdi_usb_provide_hc(struct cdi_device* dev); + +/** + * Registers a USB bus driver. Should be called by the CDI library, ideally, + * after the USB bus driver's init() function has run. + */ +void cdi_usb_driver_register(struct cdi_usb_driver* drv); + +/** + * Returns the endpoint descriptor for endpoint @ep (0 up until + * dev->endpoint_count - 1) of device @dev in @desc. + */ +void cdi_usb_get_endpoint_descriptor(struct cdi_usb_device* dev, int ep, + struct cdi_usb_endpoint_descriptor* desc); + +/** + * Executes a control transfer to endpoint @ep (0 up until + * dev->endpoint_count - 1) of device @dev, using @setup for the setup stage and + * @data for the data stage. The length and direction of transfer is deduced + * from @setup. + */ +cdi_usb_transmission_result_t + cdi_usb_control_transfer(struct cdi_usb_device* dev, int ep, + const struct cdi_usb_setup_packet* setup, + void* data); + +/** + * Executes a bulk transfer to endpoint @ep (0 up until dev->endpoint_count - 1) + * of device @dev, transferring @size bytes from/to @data. The direction of + * transfer is deduced from the endpoint given. + */ +cdi_usb_transmission_result_t cdi_usb_bulk_transfer(struct cdi_usb_device* dev, + int ep, void* data, + size_t size); + +#endif diff --git a/include/cdi/usb_hcd.h b/include/cdi/usb_hcd.h new file mode 100644 index 0000000..774c0a9 --- /dev/null +++ b/include/cdi/usb_hcd.h @@ -0,0 +1,159 @@ +/* + * Copyright (c) 2015 Max Reitz + * + * This program is free software. It comes without any warranty, to + * the extent permitted by applicable law. You can redistribute it + * and/or modify it under the terms of the Do What The Fuck You Want + * To Public License, Version 2, as published by Sam Hocevar. See + * http://sam.zoy.org/projects/COPYING.WTFPL for more details. + */ + +#ifndef _CDI_USB_HCD_H_ +#define _CDI_USB_HCD_H_ + +#include <cdi.h> +#include <cdi/usb.h> + + +/** + * Opaque value identifying a transaction for the host controller. + */ +typedef void* cdi_usb_hc_transaction_t; + +typedef enum { + CDI_USB_IN, + CDI_USB_OUT, + CDI_USB_SETUP, +} cdi_usb_transfer_token_t; + + +/** + * Describes a USB host controller. + */ +struct cdi_usb_hc { + struct cdi_device dev; + + /** + * Root hub provided by the HC. The hub driver responsible for this root hub + * is part of the cdi_usb_hcd structure. + */ + struct cdi_usb_hub rh; +}; + +/** + * Describes the USB bus provided by a USB host controller and its root hub. All + * buses are handled by the USB bus driver, therefore there are no "identifying" + * fields in this structure. + */ +struct cdi_usb_hc_bus { + struct cdi_bus_data bus_data; + struct cdi_usb_hc* hc; +}; + +/** + * Contains information about a communication pipe to a USB device endpoint used + * for USB transactions. + */ +struct cdi_usb_hc_ep_info { + /// Device ID + int dev; + + /// Endpoint ID + int ep; + + /// Endpoint type + cdi_usb_endpoint_type_t ep_type; + + /// Transfer speed + cdi_usb_speed_t speed; + + /// Maximum packet size for this endpoint + int mps; + + /** + * For low and full speed devices operated behind a high speed hub: @tt_addr + * is the USB device address of the translating USB hub (the last high speed + * hub), @tt_port is the port (0-based index) of that hub where the first + * non-high-speed device of this device's tree is plugged into. + */ + int tt_addr, tt_port; +}; + +/** + * Describes a single USB transmission. + */ +struct cdi_usb_hc_transmission { + /// Transaction this transmission is part of + cdi_usb_hc_transaction_t ta; + + /// Type of transfer to be performed + cdi_usb_transfer_token_t token; + + /// Buffer to be used (may be NULL if @size is 0) + void* buffer; + + /// Number of bytes to be transferred (may be 0, and may exceed the MPS) + size_t size; + + /** + * Toggle bit to be used for the first packet issued in this transmission. + * If @size exceeds the MPS and thus multiple packets are transmitted, the + * toggle bit will be toggled automatically. + */ + int toggle; + + /** + * Result of this transmission. Only valid after wait_transaction() has + * returned. + */ + cdi_usb_transmission_result_t* result; +}; + +/** + * Describes a USB host controller driver. + */ +struct cdi_usb_hcd { + struct cdi_driver drv; + + /** + * USB hub driver which is responsible for all root hubs provided by this + * HCD. + */ + struct cdi_usb_hub_driver rh_drv; + + /** + * Creates a USB transaction. A transaction consists of one or more + * transmissions to a single endpoint. + */ + cdi_usb_hc_transaction_t + (*create_transaction)(struct cdi_usb_hc* hc, + const struct cdi_usb_hc_ep_info* target); + + /** + * Enters a transmission into a transaction. The transmission will be + * executed asynchronously. + */ + void (*enqueue)(struct cdi_usb_hc* hc, + const struct cdi_usb_hc_transmission* trans); + + /** + * Wait until all transmissions enqueued in the given transaction have been + * executed. The variables pointed to by the @result field of the + * transmissions enqueued will only be valid when the first call to this + * function after the enqueue() calls returns. + */ + void (*wait_transaction)(struct cdi_usb_hc* hc, + cdi_usb_hc_transaction_t ta); + + /** + * Destroys a transaction. Transmissions which have not been waited on may + * or may not have been executed by the time this function returns. The + * values of the variables pointed to by the @result field of unwaited-for + * transmissions are not valid, neither are the buffer contents for + * receiving transmissions. + */ + void (*destroy_transaction)(struct cdi_usb_hc* hc, + cdi_usb_hc_transaction_t ta); +}; + +#endif -- 2.3.5
Antworten
- [cdi-devel] [PATCH v2 6/9] cdi/usb: Add headers · Kevin Wolf